如何更容易地从5加仑桶中倒材料？

If you pour liquid material from a 5-gallon pail with the spout located at the bottom (6 o'clock position), the material will flow out of the container very quickly and erratically, resulting in spills. The following video shows a better way to dispense from 5-gallon pails:
  1. Be sure to read technical bulletin for each Smooth-On product. Some materials require pre-mixing before using.
  2. While the container is upright, remove protective cover and cap from the Reike spout with a screwdriver. Pull to remove the plastic seal inside the spout.
  3. On a level table, place the 5 gallon container on its side. Make certain that the pour spout is closest to the ceiling (12 o'clock position).
  4. Slowly roll the 5-gallon container so that the material begins to flow out of the container in a slow and uniform stream. This will help eliminate air being introduced into the mixture and prevent spillage.

免责声明
这些FAQ文章作为参考,并提供模具制造和浇注过程中遇到问题的可能解决方案。由最终用户确定任何特定应用的适用性。我们不做保证。使用任何材料前参考所提供的技术公告(TB)和安全数据表(SDS)。在大范围使用前，建议小范围试验确定任何建议的适用性。