James Day was born in Kansas in 1970. Being the son of an artist he inevitably became an artist himself. He started from a young age working with clay, kilns, and eventually casting and creating his own limited editions.
To create the molds for the sculptures below, James used PMC-744 urethane rubber,OOMOO 30 tin-cure silicone rubber and Mold Max 30 tin-cure silicone rubber over clay. The castings were made using Smooth-Cast 326, sand and portland cement, then painted with acrylic paints and finished with acrylic sealant.
If you are interested in purchasing originals, limited editions or signed prints please contact the artist. http://www.artofday.com/artist_james_day.htm
