Plat Cat

Plat Cat

Plat-Cat®铂金固化硅胶促进剂是一种添加剂,用于加快Smooth-On铂金固化硅胶产品的固化时间,而不显着影响其最终物理性能。这样可以更快速地从原始模型中去除(脱模)组件或缩短硅胶模具固化时间。促进剂按重量加入到A组分中,并且在加入B组分前充分与A组分混合。
 
注意:添加促进剂会大大缩短液体硅胶产品的操作时间(混合和浇注材料的时间)。

特征

说明

Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Store and use material at room temperature (73°F/23°C). This product has a limited shelf life and should be used as soon as possible.
 

Example - Ecoflex 00-30 (1:1 Mix Ratio): To reduce the demold time of Ecoflex 00-30 from 4 hours to 1 hour, add 40 grams of accelerator to 1000 grams of Ecoflex 00-30 Part A. Mix thoroughly for one minute, making sure that you scrape the sides and bottom of your container several times. Next, add 1000 grams of Part B and mix thoroughly for one minute, again making sure that you scrape the bottom and sides of your container several times. Do not delay between mixing and pouring, as your pot life is about 10 minutes. In about 1 hour, the rubber mold can be removed from the original model.

Example – Smooth Sil 940 (10:1 Mix Ratio): To reduce the demold time of Smooth-Sil 940 from 16 hours to 2.5 hours, add 20 grams ofaccelerator to 1000 grams of Smooth-Sil 940 Part A. Mix thoroughly for one minute, making sure that you scrape the sides and bottom of your container several times. Next, add 100 grams of Part B and mix thoroughly for one minute, again making sure that you scrape the bottom and sides of your container several times. Do not delay between mixing and pouring, as your pot life is about 10 minutes. In about 3 hours, the rubber mold can be removed from the original model.

介绍产品制作工艺的文章